Whenever I come across a glitch with my Boge Air Compressor, I remind myself not to panic. Instead, I grab my toolbox and put on my problem-solving hat.


You see, most compressor issues aren’t as complex as they seem. Often, it’s a simple matter of checking the power supply, testing the pressure switches, or inspecting the valves.


Each problem has a tell-tale sign, and once you know what to look for, troubleshooting becomes a breeze.


So, let’s roll up our sleeves and dive into the world of Boge air compressor troubleshooting, together we can keep our machines humming and our work flowing.


Boge Air Compressor Troubleshooting


Boge Air Compressor Troubleshooting:



If you’re experiencing issues with your Boge Air Compressor, a few common troubleshooting steps can help.

Check for leaks, ensure the pressure switch is working properly, and verify the power supply.

Start by checking the pressure switch, which should be set to the proper cut-in and cut-out settings. If it appears correct, then inspect the air filter for contamination.

Clean or replace if necessary. Finally, check that all connections are properly secured and tight.


20 Common Boge Air Compressor Problems And Solutions:

Having worked with Boge air compressors for years, I’ve encountered my fair share of issues. But fear not, just like every problem has a solution, so does every compressor hiccup.


Let’s walk together through 20 common problems you might experience with your Boge air compressor and how to solve them.


1. Compressor Not Starting:

If your compressor isn’t starting, it could be an issue with the power supply. Check the power source and ensure your compressor is plugged into a functioning outlet.


2. Low Pressure:

If you’re experiencing low pressure, your compressor might have an air leak. Check all connections for leaks and ensure your pressure setting is correct.


3. Overheating:

Overheating could be due to a lack of oil. Check your oil levels and change the oil if necessary. Overheating can also be caused by a dirty cooler. In this case, clean the cooler thoroughly to ensure adequate cooling.


4. Oil Leaks:

Oil leaks can be caused by faulty gaskets or worn out seals. Replace any worn parts and tighten all connections to prevent further issues with oil leakage.


5. High Vibration Levels:

High vibration levels could mean that your compressor has loose bolts or other unsecured components. Tighten any loose nuts, bolts, and screws to reduce vibration levels.


6. Unstable Pressure Levels:

Unstable pressure levels could indicate a faulty regulator. Check the regulator to make sure it is functioning properly and replace it if necessary.


7. Poor Performance:

Poor performance could point to a clogged air filter or valve plate. Clean out all filters and plates, then inspect for any irregularities in their condition. This should restore your compressor’s performance to its normal level.


8. Noise Issues:

Noise pollution from an air compressor could indicate a worn-out motor or fan. Replace the motor or fan if necessary, and make sure to use parts specifically designed for your Boge air compressor.


9. Oil Contamination:

Oil contamination can be caused by dirty components such as filters and valves. Clean all contaminants out of these components to prevent any further oil contamination.


10. Corrosion:

Corrosion can occur due to moisture and other environmental factors. Make sure your compressor is stored in a dry location, and check for any signs of oxidation on the metal components.


11. Faulty Line Filter:

A faulty line filter could be restricting airflow or causing pressure problems. If necessary, replace the line filter to improve performance.


12. Leakage at Fittings:

Leakage at fittings can be caused by loose connections or worn gaskets. Tighten all connections and replace any worn seals to prevent further leakage.


13. Failed Pressure Switch:

A failed pressure switch will prevent the compressor from starting up properly. Replace the pressure switch if necessary, or you could opt for a whole new unit.


14. Damaged Valves:

Damaged valves can lead to poor performance or pressure issues. Replace any damaged valves and remember to use parts designed specifically for your Boge air compressor.


15. Failed Control Panel:

A failed control panel could be preventing you from controlling the speed of your compressor. If necessary, replace the control panel to get back full functionality.


16. Dirty Cooler:

Dirty coolers will prevent proper cooling, leading to overheating problems. Clean out the cooler on a regular basis to keep your compressor running smoothly.


17. Worn Out Pulley:

A worn out pulley can cause excessive vibrations and noise levels. If necessary, replace the pulley with one designed specifically for your Boge air compressor.


18. Faulty Pressure Regulator:

A faulty pressure regulator could be preventing the compressor from reaching full pressure. Replace the regulator if needed, or opt for a new unit.


19. Failed Motor:

A failed motor will prevent your compressor from starting up properly. If necessary, replace the motor or look into purchasing a whole new unit.


20. Clogged Exhaust:

Clogged exhausts can lead to poor performance and overheating. Clean out the exhaust regularly to keep proper airflow in your compressor.


With these 20 common problems and solutions, you should now have the knowledge necessary to maintain your compressor for optimal performance.


Regular maintenance, cleaning, and inspection will ensure that your Boge air compressor operates as efficiently as possible.


Benefits Of Troubleshooting Boge Air Compressor:

Troubleshooting your Boge Air Compressor has several significant benefits that can lead to improved performance and longevity of your machine.


Primarily, it allows you to identify and rectify any emerging issues before they escalate into serious problems, saving on costly repairs or replacements in the long run.


Additionally, by regularly troubleshooting, you become more familiar with the operational patterns of your air compressor, enabling you to detect anomalies swiftly.


This proactive approach to maintenance ultimately ensures smoother operation, higher efficiency, and extends the life of your Boge Air Compressor.


Maintenance Tips For Your Boge Air Compressor:

Maintaining your Boge Air Compressor is not as daunting as it might seem. Here are some tips to keep your machine running smoothly:


1. Regular Inspection:

Make it a habit to inspect the compressor and its components regularly. Look out for any signs of wear and tear, and replace damaged parts promptly.


2. Clean Regularly:

Dust and dirt can cause significant damage to your compressor. Ensure you clean the air inlet and other parts routinely.


3. Proper Lubrication:

Check the oil level in your air compressor frequently and lubricate it as necessary to reduce friction between moving parts.


4. Check for Leaks:

Air leaks can lead to wasted energy and decreased performance. Use a leak detector to catch any leaks early and fix them immediately.


5. Regular Servicing:

Arrange for professional servicing of your Boge Air Compressor periodically. They can help identify and fix potential issues that might escape a layman’s eye.


6. Proper Storage:

When not in use, store your compressor in a dry and clean environment to prevent rust and dust buildup.


Remember, the key to a long-lasting air compressor is regular and careful maintenance.


How Do You Reset A Boge Air Compressor?

Resetting a Boge Air Compressor is a straightforward process. First, turn off the compressor and unplug it from its power source.


Then, locate the reset button, typically found on the motor housing. Press the reset button firmly, and hold it for a few seconds.


After releasing the button, plug the compressor back into the power source and turn it on. If the compressor still doesn’t start, there might be other underlying issues that require professional attention.


Always remember to follow safety guidelines when handling your Boge Air Compressor to avoid any accidents.


How Do I Know If My Boge Air Compressor Is Bad?

There are several indicators that your Boge Air Compressor may be experiencing issues.


The most common sign is a noticeable decrease in pressure or the inability to build up pressure at all. This could be due to a leak, a faulty valve, or other internal issues.


Another red flag is abnormal noise during operation, such as banging, clattering, or high-pitched squeals, which could indicate mechanical problems.


Overheating is another significant symptom of a bad compressor. If the unit feels unusually hot or shuts down due to overheating, there’s likely a problem.


If your compressor frequently trips the circuit breaker, it could be drawing too much power due to a fault.


Lastly, if you notice an increased energy bill without a corresponding increase in usage, your air compressor may not be performing efficiently and could be due for maintenance or repair.


Always consult with a professional if you suspect your Boge Air Compressor might be bad. It’s better to address potential problems earlier rather than later, as ignoring them could lead to more serious damage and costly repairs.


What Would Cause A Boge Air Compressor To Not Build Pressure?

Several issues could cause a Boge Air Compressor to not build pressure effectively. One common cause could be air leaks in the system.


Small leaks may seem insignificant, but they can significantly impact the compressor’s ability to maintain pressure.


Another potential issue could be a faulty check valve. If the valve is not sealing correctly, air will escape, causing the compressor to lose pressure.


Inadequate lubrication can also lead to pressure problems. Insufficient oil in the compressor can increase friction between parts and result in lower pressure.


Moreover, a malfunctioning pressure switch or an improperly set pressure switch might prevent the compressor from building pressure.


It’s also possible that wear or damage to the compressor pump could prevent it from compressing air adequately.


Always remember, if you’re experiencing issues with your Boge Air Compressor, it’s advisable to consult with a professional to prevent any further damage.


Boge Air Compressor Won’t Start:

If your Boge Air Compressor won’t start, there are a few potential issues you can check.


Firstly, ensure that the power source is connected properly and that there’s no issue with the supply. It’s worth checking your circuit breaker or fuse box to ensure there hasn’t been a trip or a blown fuse.


The problem could also lie in the pressure switch. If it’s faulty or incorrectly set, the compressor might not start.


Also, look for any signs of damage or wear in the motor or the starter capacitor, both of these parts are essential for the compressor’s startup.


Lastly, don’t forget to check the safety valve; if it’s opened, the compressor won’t start.


Remember, if you’re not comfortable troubleshooting these issues yourself, it’s always a good idea to call in a professional to avoid causing further damage to your Boge Air Compressor.


Boge Air Compressor Not Building Pressure:

If your Boge Air Compressor isn’t building pressure as it should, there could be several potential causes.


One of the most common reasons is an air leak, which may occur in any part of the system, causing a drop in pressure.


Another possible culprit is a faulty check valve. If it isn’t sealing properly, air can escape, making it impossible for the compressor to maintain pressure.


In addition, inadequate lubrication can cause increased friction between parts, resulting in lower pressure.


Even a malfunctioning pressure switch or one that is improperly set can stop your compressor from building pressure.


Lastly, wear and tear or damage to the compressor pump can prevent it from compressing air adequately.


If you’re facing any of these issues, it’s advisable to consult with a professional to avoid exacerbating the problem.


Boge Air Compressor Reset Button:

Resetting your Boge Air Compressor is a simple process that can sometimes help resolve minor issues with the machine.


To begin, ensure the compressor is off and unplugged from its power source.


Then, locate the reset button, which is typically positioned on the motor housing.


Press this button and hold it down for a few seconds before releasing.


After the button has been reset, reconnect the compressor to the power source and turn it back on.


If your compressor still doesn’t start, it might be time to consult a professional as there could be more serious underlying issues at play.


Always remember to adhere to safety guidelines when performing this operation to prevent potential accidents.


Boge Air Compressor Won’t Turn On:

If your Boge Air Compressor fails to turn on, it can be a result of several possible issues.


Firstly, ensure that you’ve properly connected the compressor to a working power source. A quick check to see if other devices are working on the same power outlet can help eliminate this possibility.


If power supply isn’t the issue, inspect the pressure switch. A faulty or incorrectly set pressure switch might prevent the compressor from turning on.


The motor or the starter capacitor can also be the problem. Look for any visible signs of damage or wear that might be preventing startup.


The safety valve could be another culprit; if it’s opened, the compressor will not start. If your compressor still doesn’t turn on after checking these factors, it might be time to consult a professional.


Always prioritize safety by disconnecting the compressor from the power source before attempting any troubleshooting.


Boge Air Compressor Check Valve Problem:

Should you encounter a problem with the check valve of your Boge Air Compressor, it is imperative to address it promptly to prevent further issues.


A faulty check valve can lead to a loss of pressure within the system as it fails to seal correctly, allowing air to escape.


Signs of a check valve problem might include the compressor running more frequently than usual to maintain pressure, or the compressor not building up pressure at all.


In such a scenario, it’s always advisable to consult with a professional. Attempting to repair or replace the check valve yourself can result in damage, especially if you’re not familiar with the process.


Safety should always be your utmost priority when dealing with such issues.


Boge Air Compressor Cleaning Tips:

Keeping your Boge Air Compressor clean is a crucial aspect of its regular maintenance.


Dirt and dust accumulation can lead to issues with air flow and overall performance.


Begin by unplugging the compressor and using a clean, dry cloth to wipe down the exterior. Remove any visible dust or grime. For the air intake vents, use a soft brush to gently dislodge any accumulated dirt.


If your model has a removable air filter, take it out and clean it according to the manufacturer’s instructions.


You can use a vacuum cleaner to remove dust from the motor and pump area, but be careful not to damage any delicate parts.


Always remember to clean up any oil spills immediately to prevent slips and falls. Regular cleaning not only enhances the compressor’s efficiency but also prolongs its lifespan.


Always ensure that the compressor is disconnected from the power source before you start cleaning.


Boge Air Compressor Lubrication Tips:

Lubrication of your Boge Air Compressor enhances its operation and longevity. Different parts of the machine, particularly the moving components, require occasional lubrication to reduce friction and increase efficiency.


Use only the manufacturer-recommended oil for lubrication to prevent damage. It’s also important to regularly check oil levels and to maintain them within suggested parameters; too little oil can result in increased wear and tear while too much can cause leakage or other issues.


The oil should be visibly clean, not cloudy or dirty; if it appears contaminated, it should be replaced.


Always ensure the compressor is off and unplugged from the power source before you start the lubrication process, and remember to follow safety guidelines at all times.


Storing Your Boge Air Compressor:

When it comes to storing your Boge Air Compressor, there are a few key points to keep in mind to ensure its longevity.


First, always store your compressor in a clean, dry environment where it is protected from dust, humidity, and extreme temperatures.


Ensure the compressor is switched off and unplugged before storing, and it’s also advisable to release any compressed air left in the tank.


If you won’t be using it for an extended period, you should drain the oil from the compressor to prevent degradation and buildup that can cause damage.


For further protection, consider covering your compressor with a breathables yet dust-resistant cover.


This will keep dust and debris from settling on the machine, helping to maintain its functionality and prolong its lifespan.


Always refer to your manufacturer’s instructions for specific storage guidelines and preventative maintenance.