As someone who’s spent plenty of time around shop tools, I know the frustration that comes with a faulty air compressor.


When your Emglo air compressor starts giving you trouble, it’s not just an inconvenience; it’s a hiccup in your workflow.


Whether it’s a pressure issue, a motor problem, or an air leak, each challenge has its unique solution.


But don’t worry, I’m here to help you through the troubleshooting process, step by step.


With a little patience and the right guidance, you’ll have your Emglo air compressor back in peak condition in no time.


Emglo Air Compressor Troubleshooting


Emglo Air Compressor Troubleshooting:



If your Emglo Air Compressor is not functioning as expected, begin troubleshooting by checking the power supply to ensure it’s connected and sufficient.

Next, verify the pressure settings and adjust if necessary. Also, inspect the air filter for any blockage or damage. If the air compressor still isn’t working, try to reset it by switching it off and then back on again.

Finally, consult the user manual for more detailed troubleshooting instructions. If all else fails, contact a certified Emglo technician for assistance.


20 Common Emglo Air Compressor Problems And Solutions:


1. Overheating:

Overheating is a common issue with Emglo air compressors, typically caused by insufficient oil or a clogged air filter. Ensure the machine is well lubricated and the air filter is clean to prevent this issue.


2. Loud Noises:

Loud noises can indicate that internal parts are worn or failing. Regular maintenance and replacing parts as necessary can help mitigate this problem.


3. Compressor Not Starting:

If your compressor won’t start, it could be due to a faulty power supply, a defective motor, or a problem with the pressure switch. Check these components and replace if necessary.


4. Air Leaks:

Air leaks can decrease your compressor’s efficiency. Check all connections, seals and hoses for leaks and repair as required.


5. Pressure Problems:

If your compressor struggles to build up pressure, it could be due to worn seals, a faulty check valve, or a clogged air filter. Regularly inspect these parts for wear and damage.


6. Oil Leaks:

Oil leaks are usually caused by damaged seals or a cracked oil tank. Inspect these components and replace them if needed.


7. Excessive Vibration:

If your compressor is vibrating excessively, it might be due to misaligned parts or an unbalanced drive shaft. Professional servicing is recommended to rectify this issue.


8. Incomplete Pressure Relief:

If the pressure relief valve doesn’t fully release pressure, it could be caused by a defective valve. Replacement is typically necessary.


9. Inadequate Airflow:

If your compressor is producing insufficient airflow, it could be due to a clogged air filter, a faulty pump, or worn pistons. Regular maintenance can help prevent this problem.


10. Motor Runs Continuously:

If the motor is running continuously, the pressure switch may be set too high. Adjust the switch to the correct setting.


11. Motor Fails to Run:

If the motor fails to run, check the power source and ensure the motor is receiving the correct voltage. If the voltage is correct, the motor may need replacement.


12. Excessive Oil Consumption:

If your compressor is using too much oil, it might be due to worn seals or pistons. Regular maintenance and part replacement can resolve this issue.


13. Compressor Runs but Doesn’t Produce Air:

If the compressor motor runs but doesn’t produce air, the pump or the valves may be damaged. Replacement components are usually required.


14. Compressor Shuts Down During Operation:

If your compressor unexpectedly shuts down during operation, it could be due to overheating or a fault in the safety shutdown system.


15. Belt Slippage:

Belt slippage can occur due to wear and tear or improper tension. Regular belt inspections and adjustments can prevent this issue.


16. Tripping Circuit Breaker:

If your compressor is tripping the circuit breaker, the motor may be drawing too much power. Consult a professional electrician or compressor technician for assistance.


17. Compressor Not Pumping Air at Full Capacity:

If your compressor isn’t pumping air at its full capacity, the pump or piston rings may be worn. Replacing these parts can improve performance.


18. Pulsating Airflow:

Pulsating airflow can be an indicator of a clogged air filter or a faulty check valve. Regular cleaning or replacement can rectify this issue.


19. Tank Fails to Hold Pressure:

If the tank doesn’t hold pressure, there might be a leak. Inspect the tank, seals, and gaskets for damage and make repairs where necessary.


20. Oil in Air Lines:

Oil in the air lines can be a sign of a faulty separator or worn piston rings. Replacement parts are typically necessary to correct the issue.


Remember, when facing issues with your Emglo Air Compressor, always refer to the user manual or consult with a professional technician to avoid causing further damage.


Benefits Of Troubleshooting Emglo Air Compressor:

Troubleshooting your Emglo air compressor offers several advantages. It enhances the lifespan of the compressor, ensuring it continues to operate efficiently for an extended period.


Furthermore, it aids in identifying potential issues early, preventing costly breakdowns and reducing downtime.


Regular troubleshooting additionally enhances the compressor’s performance, ensuring consistent and optimum output.


It can also lead to decreased energy consumption, contributing to cost savings and a lower environmental impact.


In essence, troubleshooting your Emglo Air Compressor is an essential step towards maintaining its functionality and efficiency.


Maintenance Tips For Your Emglo Air Compressor:

Maintaining your Emglo Air Compressor involves regular checks and servicing to ensure it operates efficiently and lasts longer. Here are some tips for maintaining your compressor:


1. Regular Cleaning:

Dust and debris can hinder the performance of the compressor. It’s essential to clean the air intake vents regularly to keep them clear.


2. Check and Replace Air Filters:

If your compressor’s air filters are dirty or damaged, they should be cleaned or replaced to improve the machine’s overall performance and longevity.


3. Inspect Hoses Regularly:

Hoses are prone to wear and tear. Regular checks can help spot any leaks or cracks in time to prevent any significant damage.


4. Drain Moisture from Tanks:

The tanks in air compressors store moisture from the air they compress. Draining these tanks regularly is crucial to prevent rusting and keep your compressor running efficiently.


5. Lubricate Moving Parts:

Regular lubrication will ensure smooth operation and reduce wear on the machine’s moving parts.


6. Check Safety Shutdown System:

Most Emglo compressors have a built-in safety shutdown mechanism. Make sure it’s functioning correctly to prevent overheating and other potential damages.


Remember, always refer to your machine’s manual for specific maintenance procedures.


How Do You Reset A Emglo Air Compressor?

Resetting your Emglo Air Compressor is a straightforward process:


1. First, ensure the compressor is switched off and unplugged from the power source to prevent any accidental startup.


2. Next, locate the pressure switch on your compressor. This is usually a red or black button found on the compressor’s motor or pump.


3. Press the reset button firmly until you hear a click. This indicates that the compressor has been reset.


4. Now, plug the compressor back into the power source and switch it on. The compressor should start running again. Remember, the reset button is a safety feature that prevents the motor from overheating.


If your compressor frequently trips and needs resetting, it may be indicative of a more severe issue, and professional assistance may be required.


Always refer to your owner’s manual for specific instructions and safety precautions.


How Do I Know If My Emglo Air Compressor Is Bad?

Determining whether your Emglo Air Compressor is malfunctioning involves a few key observations.


Firstly, listen for any unusual noises when the compressor is running. Uncommon sounds like knocking or rattling could indicate a problem.


Secondly, check if the compressor is having difficulty starting or building pressure, as this could suggest issues with the motor or pump.


Notice any leaks around the machine, especially from the hoses or air tank. A leak will not only affect the compressor’s performance but could lead to other more serious problems down the line.


Also, check your energy bills; an unexpected increase might mean the compressor is working harder than it should be, indicating a potential issue.


Lastly, if the safety shutdown system activates more frequently than usual, this could signal that the compressor is overheating, suggesting a fault with the machine.


Always consult with a professional if you suspect any issues with your Emglo Air Compressor.


What Would Cause A Emglo Air Compressor To Not Build Pressure?

Several factors could cause an Emglo Air Compressor to not build pressure effectively.


One of the most common reasons is a leak in the air lines, tank, or fittings. Over time, these components can wear out and develop leaks, hindering the compressor’s ability to build up sufficient pressure.


A malfunctioning check valve can also be a culprit. If the check valve is not functioning correctly, air might be escaping back into the pump, preventing the compressor from maintaining pressure.


Furthermore, the pressure switch, responsible for regulating the air pressure inside the tank, could also be faulty.


If it’s not triggering the motor to stop once the desired pressure is reached, the compressor will struggle to maintain pressure.


Lastly, a compromised piston seal or a damaged piston ring could also lead to this problem. These parts are crucial in creating and holding the pressure, and any damages to them can result in significant loss of pressure.


Remember, it’s always best to refer to a professional if your compressor is having trouble building pressure.


Emglo Air Compressor Won’t Start:

If your Emglo Air Compressor won’t start, it could be due to several reasons.


Firstly, check if the power source is properly connected and the switch is in the ‘on’ position. If the compressor is connected but still not starting, it might be an issue with the motor or the pressure switch.


A malfunctioning pressure switch could fail to signal the motor to start. Similarly, if the motor itself is faulty or overheated, it will prevent the compressor from starting.


Overheating can be a result of extended usage without proper ventilation or cooling periods.


Check if the motor is hot to touch. If it is, allow the compressor to cool down and try starting it again.


If the compressor still doesn’t start, it’s best to consult with a professional to avoid further damage.


Always remember to adhere to the safety guidelines when operating your Emglo Air Compressor.


Emglo Air Compressor Not Building Pressure:

If your Emglo Air Compressor is not building pressure, there could be several underlying issues. A leak in the air lines, tank, or fittings is one of the most common culprits.


Over time, these components can wear out and develop leaks, negatively affecting the compressor’s ability to accumulate adequate pressure.


Another potential issue could be a defective check valve. If it isn’t working properly, air might escape back into the pump, preventing the compressor from maintaining pressure.


Additionally, a faulty pressure switch, which regulates the air pressure inside the tank, might also be to blame.


If it’s not signaling the motor to stop once the desired pressure is attained, the compressor will struggle to preserve pressure.


Lastly, damages to the piston seal or the piston ring could lead to this problem. These parts are integral in generating and holding pressure, and any damage to them can result in a significant pressure loss.


It’s always best to consult with a professional if your compressor is experiencing issues with building pressure.


Emglo Air Compressor Reset Button:

The reset button on your Emglo Air Compressor plays a crucial role in protecting the motor from possible damage due to overheating.


If your compressor stops working suddenly, it’s worth checking if the reset button has been tripped. Typically, you can locate this button on the compressor’s motor or pump, it’s usually red or black.


To reset, press the button firmly until you hear a click, indicating that the compressor has been reset.


After this, you can plug the compressor back into the power source and switch it on.


If your compressor frequently trips and requires resetting, it’s a sign of an underlying issue that might need professional attention.


Remember always to refer to your owner’s manual for specific instructions and safety measures.


Emglo Air Compressor Won’t Turn On:

If your Emglo Air Compressor won’t turn on, several factors could be at play.


Start by checking the obvious: is the compressor plugged into a working power outlet and is the switch set to the ‘on’ position?


If yes, the problem could be with a faulty power cord or plug. Further, the motor’s overload protection could have been triggered, in which case, you would need to reset it.


Also, it’s possible that the pressure in the tank is too high, preventing the pressure switch from activating the motor.


In this case, you’ll need to drain some air from the tank. Another potential issue could be a malfunctioning pressure switch itself. If it’s not working correctly, it won’t trigger the motor to start.


Lastly, if the motor is overheated from extended use, it will prevent the compressor from starting.


Remember, if your compressor still doesn’t turn on after trying these troubleshooting steps, it’s advisable to consult a professional to avoid causing any further damage.


Emglo Air Compressor Check Valve Problem:

If your Emglo Air Compressor is having issues related to the check valve, it could be leading to a variety of problems, including the compressor not building pressure or not turning on.


The check valve, a crucial component of the compressor, ensures that the air is only flowing in one direction, from the pump to the tank.


If the check valve is faulty or damaged, air might escape back into the pump rather than being stored in the tank, thereby reducing the compressor’s ability to build and maintain pressure.


If your compressor is exhibiting such symptoms, it might be a problem with the check valve. It’s best to consult with a professional to inspect and repair or replace the check valve if necessary.


Always remember to follow the safety guidelines when handling your Emglo Air Compressor.


Emglo Air Compressor Cleaning Tips:

Regular cleaning of your Emglo Air Compressor can enhance its performance and prolong its lifespan.


Start by disconnecting the compressor from the power source to ensure safety. Using a clean, dry cloth, wipe down the exterior of the compressor to remove any dust, dirt, or oil deposits.


Pay special attention to the air intake vents; keeping these clean will ensure optimal airflow and efficient performance.


For hard-to-reach areas or stubborn dirt, consider using a soft-bristle brush. Clean the compressor tank regularly to prevent the build-up of moisture which can lead to rust over time.


You can do this by opening the drain valve at the bottom of the tank, usually after each use or at least once a week.


Always refer to your user manual for specific cleaning instructions and safety guidelines.


Remember, regular maintenance, including thorough cleaning, can keep your Emglo Air Compressor in top condition for years to come.


Emglo Air Compressor Lubrication Tips:

Proper lubrication is essential for the efficient operation and longevity of your Emglo Air Compressor.


Regularly check the oil level in your compressor; it should always be within the indicated range on the oil sight glass. If it falls below, add oil up to the required level.


Make sure to use only the recommended type of oil for your particular model, which can usually be found in the user manual.


Change the oil as per the manufacturer’s recommendation, typically every 500-1000 hours of use, or at least once a year.


Always ensure the compressor is unplugged before performing any maintenance, including oil changes.


When changing the oil, clean any spills immediately to prevent potential slip hazards.


Regular and appropriate lubrication can significantly enhance the performance and lifespan of your Emglo Air Compressor.


Storing Your Emglo Air Compressor:

When it comes to storing your Emglo Air Compressor, there are several steps you should follow to ensure its longevity and optimal performance.


First and foremost, always ensure that the compressor is switched off and unplugged from the power source.


Release any remaining pressure in the tank by opening the drain valve; this will prevent any potential damage due to pressure buildup.


Clean the compressor thoroughly to remove any dust or dirt, paying special attention to the air vents and intake areas.


If your model requires lubrication, check the oil level and top it up if necessary.


Finally, store the compressor in a clean, dry, and cool location, away from direct sunlight and extreme temperatures.


Avoid storing it in places with high humidity to prevent rusting. Cover the compressor with a protective cloth to keep it dust-free.


Always refer to your user manual for any specific storage instructions for your particular model.


Proper storage practices can help maintain the efficiency of your Emglo Air Compressor and extend its lifespan significantly.