What Size Air Compressor For Paintball Tank – Complete Guide 2024

The of the air compressor you need to use for your paintball tank depends on several factors such as the type of paintball gun, the size of the tank and your desired pressure level. In this article, we’ll take a look at how to determine what size air compressor for paintball tank you will need for a successful paintball game.

What Size Air Compressor For Paintball Tank

What Size Air Compressor For Paintball Tank


For paintball tank, you’ll need an air compressor with a CFM rating of at least 4-6 and a PSI rating around 4500-5000. HP should be in the 2-3 range, and the tank size should be around 3-6 gallons or higher.


Minimum Size Air Compressor For Paintball Tank


What Is A Paintball Tank?

A paintball tank is an air reservoir typically made from aluminum or carbon fiber that stores pressurized gas for use in a paintball gun. It’s connected to the gun either directly or via a remote line and it’s filled with high-pressure compressed air. This allows the gun to shoot off ammunition more accurately and quickly than using Co2 cartridges.


Types Of Paintball Tanks:

There are two types of paintball tanks:


High Pressure
Low Pressure

High-pressure tanks typically contain up to 4,500 PSI and low-pressure tanks usually carry up to 1,000 PSI of compressed air.

Depending on the type of paintball gun you’re using, one of these two is more suitable for your needs.


Also Read: Can You Fill A Paintball Tank With An Air Compressor?


The Size Of The Air Compressor:

The size of the air compressor you need will depend on several factors such as the type of paintball tank used, the size of that tank, and the desired operating pressure level. The larger the tank, the greater capacity air compressor you will need to fill it properly. Additionally, if you want higher levels of compressed air, you will also need a larger compressor as well.


Type Of Paintball Gun:

First, consider what type of gun you will be using. If you are using an Automatic Electric Gun (AEG), then you will likely require a larger air compressor than if you were using a manual spring-gun or pump-action marker.


Generally speaking, AEGs require more airflow and higher pressure than other types of guns in order to fire properly.


Size Of Tank:

Second, consider the size of the tank that you will be using with your air compressor. Smaller tanks require less airflow, so a smaller compressor may be sufficient for lower pressure settings. However, larger tanks require more airflow and therefore need a larger compressor to achieve higher pressure settings.


Desired Pressure Level:

Third, consider what pressure level you are aiming for when playing paintball. If you want to play at low-pressure or medium-pressure levels, then a smaller compressor may suffice; however if you’re looking to play at higher pressures (300 PSI or more), then a larger air compressor will be needed to provide enough power and consistent flow rates over time.


7 Important Factors to Consider When Selecting an Air Compressor For Paintball Tank:

Factors to Consider When Selecting an Air Compressor for Paintball Tank


When selecting an air compressor for Hopper gun, there are a few important factors to consider, such as:


PSI:

The PSI (Pounds per Square Inch) of the air compressor will determine how much pressure you can achieve in your tank. Generally speaking, higher pressures require larger motors and more powerful compressors.


HP:

The HP (Horsepower) of the compressor is an important factor to consider as it determines how quickly the machine can fill a tank with air. Typically, higher-powered compressors are able to fill tanks faster than smaller ones.


Tank Size:

As mentioned above, larger tanks require more airflow and therefore need a larger compressor to fill them up properly. It’s important to choose a compressor that has enough power and capacity for the size of tank you will be using.


CFM:

The CF (Cubic Feet per Minute) of the compressor is a measure of its airflow capacity and should be taken into account when selecting an air compressor for your paintball tank.


Flow Meter:

A flow meter is a device used to monitor the pressure levels in a tank. This can help you maintain consistent pressure levels over time, ensuring that your guns fire accurately each time.


Duty Cycle:

The Duty Cycle of an air compressor refers to how long it can run continuously without needing to rest or cool down. It’s important to select a compressor with a high duty cycle rating so that it will stay operational during long paintball sessions.


Portability:

Depending on your needs, you may need an air compressor that is portable and easy to move around. Larger compressors tend to be less portable, while smaller models may offer more flexibility and convenience.


By taking into account these important factors, you can ensure that you select the best air compressor for your paintball tank. With the right compressor, you’ll be able to enjoy hours of action-packed fun without any issues or downtime caused by a faulty machine.



Conclusion:

When selecting an air compressor for paintball tank, it’s important to take into account the size of the tank, desired pressure level, PSI rating, HP, CFM, flow meter and duty cycle. By considering these factors you can ensure that you choose the best compressor for your needs, allowing you to enjoy hours of uninterrupted action-packed fun!


Leave a Reply